End Restraint Pipe & Fittings

R2M supplies what is probably the most comprehensive range of end restraint systems in the UK. Designed to provide rapid solutions for both emergency and planned maintenance in sectors including water, gas, petrochemical and fire protection. Using end restraint fittings offers a more cost effective solution compared to traditional concrete thrust blocks or tie bar assemblies.

  • Nova Siria Smartjoints – universal fittings with end restraint from 58mm uti 327mm dia.
  • Nova Siria Multigrips – universal fittings with end restraint from 300mm uti 1400mm+ dia.
  • Couplings, flange adaptors and step fittings for ductile iron, cast iron, steel, PE and PVC

Nova Siria End Restraint Fittings:

  • Reduces stock – any single fittings can join PE/D.Iron/Cast/Steel & PVC
  • Fittings available from 58mm uti 1400mm+
  • Couplings also available reducing the need for expensive ‘back to back’ flange adaptor scenarios
  • 30mm tolerance – ensures ease of fitting even with ‘out of round pipe’. Will often fit even if the pipe has been incorrectly callipered
  • No need for tie bar arrangements / concrete thrust blocks
  • No heating blankets or re-rounding tools on PE…merely a torque wrench

Smart Joint Coupling

  • Wide tolerance
  • Fast, easy installation
  • Resistant to corrosion
  • Separate hydraulic sealing and end restraint
  • Wide range
  • Multi-material end restraint system
  • Single or separate bolts
  • Working pressure PN 16
  • Wide tolerance range
  • PN 16 rated grippers
  • Steel
  • Cast Iron
  • HDPE
  • PVC
  • Body and compression flange: Ductile Iron GGG500
  • Anticorrosion coating RILSAN NYLON 11
  • Sealing rings: NBR or EPDM
  • Bolts, nuts, washers: zinc coated Steel – alternative: grade A2 AISI 304 SS
  • End restraint grippers: tempered Steel with Dacromet coating – in alternative: martensitic stainless steel grippers

Smart Joint Flange Adaptor

  • Fast installation
  • Resistant to corrosion
  • Separate hydraulic sealing and end restraint
  • Multi-material end restraint system
  • Economy low costs for installations
  • Wide range

Multigrip Flange Adaptor

  • Pipe Locking System
  • Wide tolerance range
  • Working pressure PN 16
  • PN 16 rated grippers

  • Steel
  • Cast Iron
  • HDPE
  • PVC
  • Bolts, nuts, washers: zinc coated Steel – alternative: grade A2 AISI 304 SS
  • Body and compression flange: Ductile Iron GGG500
  • Sealing rings: NBR or EPDM
  • Anticorrosion coating RILSAN NYLON 11
  • End restraint grippers: tempered Steel with Dacromet coating – in alternative: martensitic stainless steel grippers
  • Wide tolerance
  • Multi-material end restraint system
  • Fast, easy installation
  • Resistant to corrosion
  • Separate hydraulic sealing and end restraint
  • 30mm tolerance range on pipe outside diametre
  • Single or separate bolts
  • PN10-16 rated grippers – other pressures on request
  • Pipe Locking System
  • PN 10-16 rated grippers. Other pressures on request
  • HDPE
  • Steel
  • Cast Iron
  • PVC
  • Body and compression flange: S235JR Steel
  • Bolts, nuts, washers: zinc coated Steel – alternative: grade A2 AISI 304 SS
  • Sealing rings: EPDM or NBR on request
  • End restraint grippers: tempered Steel with Dacromet coating – in alternative: martensitic stainless steel grippers
  • Anticorrosion coating RILSAN NYLON 11

Multigrip Stepped Coupling

  • Wide range
  • Wide tolerance
  • Resistant to corrosion
  • Separate hydraulic sealing and end restraint
  • Multi-material end restraint system
  • Single or separate bolts
  • 30mm tolerance range on pipe outside diametre
  • Pipe Locking System
  • PN10-16 rated grippers – other pressures on request
  • Working pressure PN 16
  • Steel
  • Cast Iron
  • HDPE
  • PVC
  • Body and compression flange: S235JR Steel
  • Bolts, nuts, washers: zinc coated Steel – alternative: grade A2 AISI 304 SS
  • Sealing rings: EPDM or NBR on request
  • End restraint grippers: tempered Steel with Dacromet coating – in alternative: martensitic stainless steel grippers
  • Anticorrosion coating RILSAN NYLON 11

Mutigrip Coupling

  • Wide tolerance
  • Separate hydraulic sealing and end restraint
  • Multi-material end restraint system
  • Resistant to corrosion
  • Wide range
  • 30mm tolerance range on pipe outside diametre
  • Pipe Locking System
  • PN10-16 rated grippers – other pressures on request
  • Working pressure PN 16
  • Steel
  • Cast Iron
  • HDPE
  • PVC
  • Body and compression flange: S235JR Steel
  • Bolts, nuts, washers: zinc coated Steel – alternative: grade A2 AISI 304 SS
  • Sealing rings: EPDM or NBR on request
  • End restraint grippers: tempered Steel with Dacromet coating – in alternative: martensitic stainless steel grippers
  • Anticorrosion coating RILSAN NYLON 11

Multigrip Bend

  • Wide tolerance
  • Wide range
  • Multi-material end restraint system
  • Separate hydraulic sealing and end restraint
  • 30mm tolerance range on pipe outside diametre
  • Working pressure PN 16 – other pressures on request
  • PN 10-16 rated grippers. Other pressures on request
  • Pipe Locking System
  • Steel
  • Cast Iron
  • HDPE
  • PVC
  • Body and compression flange: Ductile Iron GGG500
  • Bolts, nuts, washers: zinc coated Steel – alternative: grade A2 AISI 304 SS
  • Sealing rings: NBR or EPDM
  • Anticorrosion coating RILSAN NYLON 11
  • End restraint grippers: tempered Steel with Dacromet coating – in alternative: martensitic stainless steel grippers

Novagrip

  • Wide range
  • Separate hydraulic sealing and end restraint
  • PN10-16 rated grippers – other pressures on request
  • 30mm tolerance range on pipe outside diametre
  • Working pressure PN 10 and 16 – other pressures on request
  • Steel
  • Cast Iron
  • HDPE
  • PVC
  • Body and compression flange: S235JR Steel
  • Bolts, nuts, washers: zinc coated Steel – alternative: grade A2 AISI 304 SS
  • Sealing rings: EPDM or NBR on request
  • End restraint grippers: tempered Steel with Dacromet coating – in alternative: martensitic stainless steel grippers
  • Anticorrosion coating RILSAN NYLON 11

Also available in NP25 rated to 25bar end restraint working pressure and now on sizes up to 300mm NP40 40bar end restraint – Please enquire

Start typing and press Enter to search

Shopping Cart